Almin A400 is delayed-type crosslinked compound tertiary amine catalyst, good cell opening performance, improve flowability.

Almin 1027 is a delayed action tertiary amine catalyst diluted in ethylene glycol. It extends cream time and provides improved flowability while maintaining fast demolding. It is a strong urethane catalyst for shoe sole applications.

Almin 1028 is a delayed action tertiary amine catalyst diluted in butanediol. It improves cream time and provides improved flowability while maintaining fast demolding. It is a strong urethane catalyst for shoe sole applications.

Almin SMP is for flexible polyurethane foams. makes foam a faster and better curing of the skin which makes it easier to remove the paper and prevents any remaining stickiness of the foam at the saw in all formulations which are blown exclusively with water or an additional physical blowing, agent like e. g. methylene chloride,is used. anc can increases a 5 to 10 % increase of the hardness can be expected.

Almin CS90 is balanced catalyst for flexible slabstock foams and increases airflow and foam softness.

Almin 9727 is a powerful catalyst for the blowing reaction, high-efficient catalyst, well balance and stable, and one of the standard catalysts for flexible PUR ether foam systems. can be combined with mild co-catalysts, without narrowing the Almetal SO range, and its dosage is 1/2-1/3 of Almin A33.

Almin A230 is a balanced gel blow catalyst for use with methylenechloride or other auxiliary blowing agents that tend to destabilize foam formulations. And equally well in formulations that do not use auxiliary blowing agents.

Almin RP204 catalyst is a non-emissive amine for flexible slabstock foam(7–35 Kg/m3) and wide processing latitude, which has excellent foam stability and increases foam height.

Almin RP205 is an amine catalyst used in making low-density flexible slab foam(below10kg/m3), which can provide wide process latitude and has hardness improvement ability.

Almin A210 is stabilizing amine for low density and ultra low density foams(Balanced and Stabilising).

Almin A800 is stabilizing amine for low density and ultra low density foams(Balanced and Stabilising).

Almin A300 is delayed-type crosslinked compound tertiary amine catalyst, good cell opening performance, improve flowability.

Almin C225 may be used as a rapid demold catalyst for HR molded foam, effectively balances the reactions governing density reduction and urethane curing, providing optimum flowability in complex parts, while also allowing decreased demold times.